Delphi Xe Serial Port Component Speakers
Posted : admin On 24.12.2020- Delphi Serial Port Component
- Delphi Xe Serial Port Component Speakers Ebay
- Delphi Xe Serial Port Component Speakers Car Audio
- Delphi Xe Serial Port Component Speakers Best Buy
- Delphi Xe Serial Port Component Speakers Bluetooth
Serial I/O (RS232) Using Delphi (RS232)
This page demonstrates how to perform Serial I/O via RS232 using Delphi). Last Modified 09-30-03, links fixed 10-24-09 All Intel PCs have one or two serial ports usually referred to as Com1 and Com2. Thousands of components, code samples, tools and useful content for developers are available here for you. Most of components are updated regularly so you can find here their latest version for using within Delphi 10.3 Rio as well. For the information, about 10-20 products are actualised every week. Rezharts Delphi code will never work cause a lack of understanding serial communication. I will not repeat all the steps necessary to make things running but he should try out the command processor component (ComDataPacket) in addition to the comport component.
All Intel PCs have one or two serial ports usually referred to as Com1 and Com2. These comm ports provide voltages and pin outs consistent with RS-232C. Normally, these ports are used for mice, modems, printers, and the like.Under DOS, it was possible to directly access these ports. However, Windows 95 and above forbid direct hardware access. Therefore, this page exists to help get around windows. /ca-drivers-license-lookup.html.
- Winsoft ComPort 6.0 for Delphi XE10.1-XE10.3 Rio Cracked Delphi and C Builder component for serial communication for Windows. Communication with devices connected to serial port easy of use and very powerful uses multithreading and overlapping for maximum performance available for Delphi/C.
- This is Just an update on this Delphi issue. I managed to make a working example (it works pretty good) on Delphi 7 using ComPort VLC component to control a series of LEDs thru Serial COMM Software example with source code, Arduino code and ComPort VLC, all available on my site to download.
Erik Salaj from Winsoft has a com port component for Delphi XE6 Firemonkey on OSX available. This is the latest com port component in a series of com port components that he has available for Windows, Android, and IOS. The implementation is pretty basic with the demo application that comes with the component reading data using a timer. There is a 3rd party component for this: Comport for Android. See also Broadcast Receivers in Delphi XE5 Android for information about Bluetooth serial communication. As I understand, it would require some work to get this implemented, since the needed api's are not fully translated to Delphi yet. – LU RD Dec 14 '13 at 8:31.
Generic References
Basic Commands
Borland provides the following Delphi FAQ's (delphi-faq.zip 915K).
- 16193: Setting comm port configuration programmatically under Win95
- 16199: Changing com port config via Win95 CommConfig Dialog
(Pure gold :) .. except that only the baud rate can be changed :( the other 4 fields are ignored. - 16400: How can I dial out through the modem under Win32?
How to write to the comm port - 16774: How can I determine the names of the installed comm ports?
The data is read from the registry
Writing a Port
Delphi Serial Port Component
The following code from FAQ 16400 shows how to write to the comm port as a file. The code in the FAQ also verifies a valid handle before writing to it. Warning: There is an error in the FAQ - NumberWritten must be dword not LongIntThis code works for comports 1 thru 9, but not for ports 10 and higher. Instead, use code similar to the following
Reading a Port
You must configure the TimeOutBuffer. I don't know what good values should be, so I used 300.
Delphi Xe Serial Port Component Speakers Ebay
Having done that, ReadFile waits until I scan a barcode. Eventually, I will use ReadFileEx because it will call a routine when a barcode is scanned.Delphi Xe Serial Port Component Speakers Car Audio
Delphi Xe Serial Port Component Speakers Best Buy
Once the port is open and configured, here are 2 routines that will read the port. For test purposes, each was connected to its own button. Uh, both routines work when run from the IDE .. the second refuses to work if you double click on the exe file. I have no idea why.
This next routine works from the IDE, but not if you run the app by double clicking the exe file.When CreateFile, ReadFile, and WriteFile are used, Delphi does not use MSComm. Instead, it uses the following Kernel32 commands (found using Depends.exe)
If you try to search the Delphi 5 help for ReadFile, there are no hits. This is because ReadFile is a Windows API command .. not a Delphi command. Instead, click on it in your code and press F1.
Here is a reference that helped me develop this section.
TCommPort
I have been successful using TCommPort by Dirk Claessens (freeware with full source code).
I strongly suggest using someone else's component rather than trying to build one yourself. Why? Because they have already been tested on numerous systems and various undocumented 'features' have been taken into account.
Delphi Xe Serial Port Component Speakers Bluetooth
Additional References
- TSerial (shareware) is frequently mentioned in the Delphi newsgroups
- Delphi I/O Port Programming under NT v2.0 which includes a driver for manipulating the kernel I/O permissions map
- Simple I/O for Windows 95/98 only. Assembler code fails in NT.
URL: http:// cpcug.org / user / clemenzi / technical / Languages / Delphi / Delphi_SerialIO.htm
SEPA components for Delphi with Source Code (Delphi 5
Hi all, in the european union change next year the Bankingformat to the SEPA Format. All peoples and companies must change the bankingssoftware and the costumer data form acountnummers in the new IBAN and BIC numbers. See: http://www.arma-it.de/shop/artikelueber.php?wgruppeid=211&wgruppe_offen=211 Functions: - generate SEPA XML'S - Calc IBAN - BIC Database (DE,AT and CH) Questions: vertrieb@arma-it.de PS: Bankinssoftware for Develpoers (Germany only) http://www.arma-it.de/shop/artikelueber.php?wgruppeid=212&wgruppe_offen=212 El 26/10/13 21:38, A..
Why does this work fine in Delphi 2009, but not in Delphi 2010
I've been racking my head trying to figure this out and can't understand what is wrong, TFileStream.ReadComponentRes fails when I try to read a component containing a record, it works fine in Delphi 2009 and Delphi 2007, but fails with Delphi 2010 Here is the unit source and DFM *+//UnitSource+* unit Unit1; interface uses Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms, Dialogs, StdCtrls; type TThresholdMode = (tm0,tm1,tm2,tm3,tm4,tm5); TThreshold = Record Mode:TThresholdMode; Filter,Start,Stop:Integer; end; ..
Converting Delphi 2007 Indy 10.2.3 to Delphi 2009 Indy 10.5.5 [Edit]
Hello, I am currently attempting to port over a Delphi 2007 project that uses Indy 10.2.3 (very successfully) to Delphi 2009 and Indy 10.5.5 (I just got the latest development build this morning). I think I am running into an encoding issue, but am not sure. Specifically, IDHTTP with SSL calls an old CGI and the CGI returns a .zip file and I then save it to the disk. In 2007 and before this worked perfectly. In 2009, it is not. Here is the examples of the 2 different results (though cut way short in the post) I am getting back: 2007: 'PK'#3#4#$14#0#0#0#8#0'rLQ9žrPb€'#0..
Is dll developed in Delphi 6 works on Delphi 2?
I have a one dll, whose work is to creates a form with some normal vcl controls, print selected tables and email some reports. It was developed in Delphi 6. Can any other application which was developed in Delphi 2 use that dll.? If not, please let me know in which areas i need change. The dll work is only to print and email. With regards, Srikanth Varma Srikanth varma wrote: > I have a one dll, whose work is to creates a form with some normal > vcl controls, print selected tables and email some reports. It was > developed in Delphi 6. Can any other application which was d..
Code works in Delphi 7 but not in Delphi 2010 [Edit]
hello, i have a procedure that open's a file by passing the file name as the parameter to the executable. something like this {code} C : P r o g r a m F i l e s Da c k e r D r a c k e r . e x e ' G : D E l p h i 7 D e l p h i 7 A p p _ l o g . t ' {code} The source code is {code} procedure OpenFileWithExe var hReg: HKEY; Ret: Longint; RegDataType, RegDataSize: DWORD; CmdLine: array [0.560] of Char; Len: Integer; SInfo: TStartupInfo; PInfo: TProcessInformation; begin Ret := windows.RegOpenKeyEx(HKEY_CURRENT_USER, ..
Delphi and Delphi for .Net
It seems that Delphi for .Net is slower than Delphi Win32 native applicaiton. I would like to know is it true all .Net application is slower than Win32 native applicaiton or it is Delphi for .Net only. Your information is great appreciated, Inung On 2011-06-21 18:20:17 +0100, Inung Huang said: > It seems that Delphi for .Net is slower than Delphi Win32 native applicaiton. > I would like to know is it true all .Net application is slower than > Win32 native applicaiton or it is Delphi for .Net only. If you are only running the code in the application once then, yes, yo..
DesignIDE package and porting Delphi 7 components to Delphi XE2
HI I am porting components from Delphi7 to Delphi XE2, and started run in problems regarding MaskProp.dcu, some of the components uses this, and is looking for TMaskProperty class. After a lot of browsing on the net i figured out that all these units is packaged in the designide.dcp. So i have the design time component in a package that requires the designide.dcp and then the runtime component package that reguires the designtime package for the component. In the runtime component package i get errors regarding the MaskProp.dcu and the TMaskProperty class. I dont know what to do from ..
dll fails when compiled with delphi 2010, but works with delphi 7
I may be doing good if someone can just point me to the right forum I have not created a dll for some time and have not written one with 2010 before. The dll I am creating will be called as a cfx function by either a ColdFusion or BlueDragon webserver. I have written cfx DLLs in the past. The function declaration is below, it is the standard declaration from ColdFusion or Bluegradon documention on creating a CFX. procedure ProcessTagRequest(Request: TCFXRequest); export; cdecl; Since this was the first time using 2010 I wrote a very basic function to build off that was not much mor..
Delphi 2006
Hello I have a Delphi 2006 project that when I set a breakpoint, and then compile and run (F9) the program from the IDE the program no longer 'breaks' at the breakpoint, irrespective of where the breakpoint was set. The problem does not exists with any other projects, and I have made not changes to the Projects 'Options' since the problem has started. Any suggestions as to the cause of the problem and/or a solution. TIA John On Thu, 29 Jan 2009 06:15:52 +0200, John Eastman wrote: > Hello > > I have a Delphi 2006 project that when I set a breakp..
Delphi 3 breakpoints no longer working
Yes, I know that Delphi 3 is a dinosaur, but I still have code and components that require D3. Today I launched D3, and was puzzled as to why all of the breakpoints that I set were being ignored. I checked the Environment options, and yes, I had Integrated Debugging checked on. But try as I may, no project that I open, or create, will recognize a breakpoint. For instance, I can set a breakpoint on the button1.caption line, and when the code is run from within the IDE, the code execution does not pause on the breakpoint. procedure TForm1.Button1Click(Sender: TObject); begin butto..
Trying to call a .DLL from Delphi XE (used to work with Delphi 6 :-) )
Hi everyone, I have a problem where perhaps some one could help point me in the right direction. In Delphi 6 I used a stand alone package to train a neural netowrk,. The trained neural network was stored as a .DEF file. The standalone software provided a .DLL and Delphi code to call the network and get the prediced values from your sw. (The .DLL was created in 2002 and apparently is 32 bit.) I have'nt used it for years but am now coming back to it.. I now use Delphi XE on Windows 7 (32 bit) The old .exe's I had compiled from that time work fine. However in Delphi XE ..
.net component to Delphi component ?
Hello, Is there a way to use .net component inside Delphi ? Thanks On Tue, 18 Nov 2008 13:16:37 -0800, isaac sam wrote: > Is there a way to use .net component inside Delphi ? http://www.managed-vcl.com/ has some libraries for this. -- Marc Rohloff [TeamB] marc -at- marc rohloff -dot- com Marc Rohloff wrote: > On Tue, 18 Nov 2008 13:16:37 -0800, isaac sam wrote: > >> Is there a way to use .net component inside Delphi ? > > http://www.managed-vcl.com/ has some libraries for this. > I was hoping for a free tool but thanks On Tue, 18 Nov 2008..
Need help to allow a working Delphi 3 project to build on Delphi XE
How do I adjust this working Delphi 3 program that uses OLEAUTO and OLE2 to work on the newer Delphi XE, Program code is below this, errors are here : Checking project dependencies.. Compiling admn_api.dproj (Debug, Win32) dcc command line for 'admn_api.dpr' c:program files (x86)embarcaderorad studio8.0bindcc32.exe -$O- -$W+ --no-config -M -Q -AWinTypes=Windows;WinProcs=Windows;DbiTypes=BDE; DbiProcs=BDE;DbiErrs=BDE -DDEBUG -I'c:program files (x86)embarcaderorad studio8.0libWin32release';'C:UsersAdministratorDocumentsRAD Studio..
Import Component search does not work in Delphi 2009
In the Delphi 2009 IDE from menu selections ComponentImport Component the Import Component form is displayed. If I select Import Type Library to display the type library list and then use the search function, it does not work. Similarly, from menu selections ViewRegistered Type Libraries, the search filter does not work. Interestingly the Camtasia Studio 5 video dealing with the new COM components and ridl file showed the search function which is really a filter working fine. Does anyone else have this problem? If not, does anyone have a solution short of reinstalling my developme..
Hi all, in the european union change next year the Bankingformat to the SEPA Format. All peoples and companies must change the bankingssoftware and the costumer data form acountnummers in the new IBAN and BIC numbers. See: http://www.arma-it.de/shop/artikelueber.php?wgruppeid=211&wgruppe_offen=211 Functions: - generate SEPA XML'S - Calc IBAN - BIC Database (DE,AT and CH) Questions: vertrieb@arma-it.de PS: Bankinssoftware for Develpoers (Germany only) http://www.arma-it.de/shop/artikelueber.php?wgruppeid=212&wgruppe_offen=212 El 26/10/13 21:38, A..
Why does this work fine in Delphi 2009, but not in Delphi 2010
I've been racking my head trying to figure this out and can't understand what is wrong, TFileStream.ReadComponentRes fails when I try to read a component containing a record, it works fine in Delphi 2009 and Delphi 2007, but fails with Delphi 2010 Here is the unit source and DFM *+//UnitSource+* unit Unit1; interface uses Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms, Dialogs, StdCtrls; type TThresholdMode = (tm0,tm1,tm2,tm3,tm4,tm5); TThreshold = Record Mode:TThresholdMode; Filter,Start,Stop:Integer; end; ..
Converting Delphi 2007 Indy 10.2.3 to Delphi 2009 Indy 10.5.5 [Edit]
Hello, I am currently attempting to port over a Delphi 2007 project that uses Indy 10.2.3 (very successfully) to Delphi 2009 and Indy 10.5.5 (I just got the latest development build this morning). I think I am running into an encoding issue, but am not sure. Specifically, IDHTTP with SSL calls an old CGI and the CGI returns a .zip file and I then save it to the disk. In 2007 and before this worked perfectly. In 2009, it is not. Here is the examples of the 2 different results (though cut way short in the post) I am getting back: 2007: 'PK'#3#4#$14#0#0#0#8#0'rLQ9žrPb€'#0..
Is dll developed in Delphi 6 works on Delphi 2?
I have a one dll, whose work is to creates a form with some normal vcl controls, print selected tables and email some reports. It was developed in Delphi 6. Can any other application which was developed in Delphi 2 use that dll.? If not, please let me know in which areas i need change. The dll work is only to print and email. With regards, Srikanth Varma Srikanth varma wrote: > I have a one dll, whose work is to creates a form with some normal > vcl controls, print selected tables and email some reports. It was > developed in Delphi 6. Can any other application which was d..
Code works in Delphi 7 but not in Delphi 2010 [Edit]
hello, i have a procedure that open's a file by passing the file name as the parameter to the executable. something like this {code} C : P r o g r a m F i l e s Da c k e r D r a c k e r . e x e ' G : D E l p h i 7 D e l p h i 7 A p p _ l o g . t ' {code} The source code is {code} procedure OpenFileWithExe var hReg: HKEY; Ret: Longint; RegDataType, RegDataSize: DWORD; CmdLine: array [0.560] of Char; Len: Integer; SInfo: TStartupInfo; PInfo: TProcessInformation; begin Ret := windows.RegOpenKeyEx(HKEY_CURRENT_USER, ..
Delphi and Delphi for .Net
It seems that Delphi for .Net is slower than Delphi Win32 native applicaiton. I would like to know is it true all .Net application is slower than Win32 native applicaiton or it is Delphi for .Net only. Your information is great appreciated, Inung On 2011-06-21 18:20:17 +0100, Inung Huang said: > It seems that Delphi for .Net is slower than Delphi Win32 native applicaiton. > I would like to know is it true all .Net application is slower than > Win32 native applicaiton or it is Delphi for .Net only. If you are only running the code in the application once then, yes, yo..
DesignIDE package and porting Delphi 7 components to Delphi XE2
HI I am porting components from Delphi7 to Delphi XE2, and started run in problems regarding MaskProp.dcu, some of the components uses this, and is looking for TMaskProperty class. After a lot of browsing on the net i figured out that all these units is packaged in the designide.dcp. So i have the design time component in a package that requires the designide.dcp and then the runtime component package that reguires the designtime package for the component. In the runtime component package i get errors regarding the MaskProp.dcu and the TMaskProperty class. I dont know what to do from ..
dll fails when compiled with delphi 2010, but works with delphi 7
I may be doing good if someone can just point me to the right forum I have not created a dll for some time and have not written one with 2010 before. The dll I am creating will be called as a cfx function by either a ColdFusion or BlueDragon webserver. I have written cfx DLLs in the past. The function declaration is below, it is the standard declaration from ColdFusion or Bluegradon documention on creating a CFX. procedure ProcessTagRequest(Request: TCFXRequest); export; cdecl; Since this was the first time using 2010 I wrote a very basic function to build off that was not much mor..
Delphi 2006
Hello I have a Delphi 2006 project that when I set a breakpoint, and then compile and run (F9) the program from the IDE the program no longer 'breaks' at the breakpoint, irrespective of where the breakpoint was set. The problem does not exists with any other projects, and I have made not changes to the Projects 'Options' since the problem has started. Any suggestions as to the cause of the problem and/or a solution. TIA John On Thu, 29 Jan 2009 06:15:52 +0200, John Eastman wrote: > Hello > > I have a Delphi 2006 project that when I set a breakp..
Delphi 3 breakpoints no longer working
Yes, I know that Delphi 3 is a dinosaur, but I still have code and components that require D3. Today I launched D3, and was puzzled as to why all of the breakpoints that I set were being ignored. I checked the Environment options, and yes, I had Integrated Debugging checked on. But try as I may, no project that I open, or create, will recognize a breakpoint. For instance, I can set a breakpoint on the button1.caption line, and when the code is run from within the IDE, the code execution does not pause on the breakpoint. procedure TForm1.Button1Click(Sender: TObject); begin butto..
Trying to call a .DLL from Delphi XE (used to work with Delphi 6 :-) )
Hi everyone, I have a problem where perhaps some one could help point me in the right direction. In Delphi 6 I used a stand alone package to train a neural netowrk,. The trained neural network was stored as a .DEF file. The standalone software provided a .DLL and Delphi code to call the network and get the prediced values from your sw. (The .DLL was created in 2002 and apparently is 32 bit.) I have'nt used it for years but am now coming back to it.. I now use Delphi XE on Windows 7 (32 bit) The old .exe's I had compiled from that time work fine. However in Delphi XE ..
.net component to Delphi component ?
Hello, Is there a way to use .net component inside Delphi ? Thanks On Tue, 18 Nov 2008 13:16:37 -0800, isaac sam wrote: > Is there a way to use .net component inside Delphi ? http://www.managed-vcl.com/ has some libraries for this. -- Marc Rohloff [TeamB] marc -at- marc rohloff -dot- com Marc Rohloff wrote: > On Tue, 18 Nov 2008 13:16:37 -0800, isaac sam wrote: > >> Is there a way to use .net component inside Delphi ? > > http://www.managed-vcl.com/ has some libraries for this. > I was hoping for a free tool but thanks On Tue, 18 Nov 2008..
Need help to allow a working Delphi 3 project to build on Delphi XE
How do I adjust this working Delphi 3 program that uses OLEAUTO and OLE2 to work on the newer Delphi XE, Program code is below this, errors are here : Checking project dependencies.. Compiling admn_api.dproj (Debug, Win32) dcc command line for 'admn_api.dpr' c:program files (x86)embarcaderorad studio8.0bindcc32.exe -$O- -$W+ --no-config -M -Q -AWinTypes=Windows;WinProcs=Windows;DbiTypes=BDE; DbiProcs=BDE;DbiErrs=BDE -DDEBUG -I'c:program files (x86)embarcaderorad studio8.0libWin32release';'C:UsersAdministratorDocumentsRAD Studio..
Import Component search does not work in Delphi 2009
In the Delphi 2009 IDE from menu selections ComponentImport Component the Import Component form is displayed. If I select Import Type Library to display the type library list and then use the search function, it does not work. Similarly, from menu selections ViewRegistered Type Libraries, the search filter does not work. Interestingly the Camtasia Studio 5 video dealing with the new COM components and ridl file showed the search function which is really a filter working fine. Does anyone else have this problem? If not, does anyone have a solution short of reinstalling my developme..